Read Freeze Frame Data For Engine (OBD Mode)
On the << Main Menu >> display screen, select the {Each System Check}.
On the << System Selection Menu >> display screen, select the {Engine Control System}.
Select the {OK} after the information of engine type is displayed.
On the << Engine Diagnosis >> display screen, select the {OBD System}.
On the << OBD Menu >> display screen, select the {Freeze Frame Data}.
- A list of the support data is shown in the following table.FREEZE FRAME DATA FOR ENGINE (OBD MODE)
Contents Display Unit of measure DTC for freeze frame data Freeze frame data DTC Air fuel ratio control system for bank 1 Fuel system for Bank1 Closed loop or Open loop Engine load data Calculated load value % Engine coolant temperature signal Coolant Temp. °C or °F Short term fuel trim by front oxygen (A/F) sensor Short term fuel trim B1 % Long term fuel trim by front oxygen (A/F) sensor Long term fuel trim B1 % Intake manifold absolute pressure signal Mani. Absolute Pressure mmHg, kPa, inHg or psi Engine speed signal Engine Speed RPM Vehicle speed signal Vehicle Speed km/h or MPH Ignition timing advance for #1 cylinder Ignition timing adv. #1 ° Intake air temperature signal Intake Air Temp. °C or °F Intake air amount Intake Air Flow g/s Throttle position signal Throttle Opening Angle % NOTE: For detailed operation procedure, refer to the VEHICLE DIAGNOSTIC INTERFACE OPERATION MANUAL.