Vehicle Diagnostic Interface (OBD Mode)
On the << Main Menu >> display screen, select the {2. Each System Check}.
On the << System Selection Menu >> display screen, select the {Engine Control System}.
Select the {OK} after the information of engine type is displayed.
On the << Engine Diagnosis >> display screen, select the {OBD System}.
On the << OBD Menu >> display screen, select the {4. Diagnosis Code(s) Cleared}.
After the 'Clear Diagnostic Code?' is shown on the display screen, select the {OK}.
Turn the ignition switch to OFF, and then turn the Vehicle Diagnostic Interface to OFF.
NOTE:
For detailed operation procedure, refer to the VEHICLE DIAGNOSTIC INTERFACE OPERATION MANUAL.