LEMON Manuals: Even more car manuals for everyone

Knock Sensor: Adjustment/Replacement: Installation

Install the knock sensor to the cylinder block.

Tightening torque: 

24 Nm (2.4 kgf-m, 17.4 ft -lb) 

NOTE: Extraction area of the knock sensor cord must be positioned at a 60° angle relative to the engine rear.
Fig 1: Identifying Knock Sensor Installation Angle
G03872631Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Front side

Connect the knock sensor connector.

Fig 2: Connecting Knock Sensor Connector
G03872632Courtesy of SAAB-SCANIA OF AMERICA, INC.

Install the intercooler.

Connect the battery ground cable to battery.

Fig 3: Connecting Battery Ground Cable To Battery
G03872633Courtesy of SAAB-SCANIA OF AMERICA, INC.