LEMON Manuals: Even more car manuals for everyone

Intake Manifold: Adjustment/Replacement: Installation

Install the intake manifold onto cylinder heads.

NOTE: Always use new gaskets.

Tightening torque: 

25 Nm (2.5 kgf-m, 18.1 ft-lb) 

Fig 1: Installing Intake Manifold Onto Cylinder Heads
G03872550Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the fuel delivery hose, return hose and evaporation hose.

Fig 2: Connecting Fuel Delivery Hose, Return Hose And Evaporation Hose
G03872551Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connector to the oil pressure switch (B), crankshaft position sensor (C) and engine coolant temperature sensor (A).

Fig 3: Connecting Connector To Oil Pressure Switch, Crankshaft Position Sensor And Engine Coolant Temperature Sensor
G03872552Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connector to the knock sensor.

Fig 4: Connecting Knock Sensor Connector
G03872553Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connector to the camshaft position sensor.

Fig 5: Connecting Camshaft Position Sensor Connector
G03872554Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connector to the ignition coil.

Fig 6: Connecting Ignition Coil Connector
G03872555Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the engine harness with clip (A) to the bracket.

Fig 7: Connecting Engine Harness With Clip To Bracket
G03872556Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the engine harness connector to the bulkhead harness connectors.

Fig 8: Connecting Engine Harness Connector To Bulkhead Harness Connectors (1 Of 2)
G03872557Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fig 9: Connecting Engine Harness Connector To Bulkhead Harness Connectors (2 Of 2)
G03872558Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the brake booster vacuum hose.

Fig 10: Connecting Brake Booster Vacuum Hose
G03872559Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the engine coolant hoses to the throttle body.

Fig 11: Connecting Engine Coolant Hoses To Throttle Body
G03872560Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the emission hose (A) and connector (B) to the PCV hose assembly.

Fig 12: Connecting Emission Hose And Connector To PCV Hose Assembly
G03872561Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the pressure hose to the intake duct.

Fig 13: Connecting Pressure Hose To Intake Duct
G03872562Courtesy of SAAB-SCANIA OF AMERICA, INC.

Install the power steering pump.

Install the power steering tank on the bracket.

Fig 14: Installing Power Steering Tank On Bracket
G03872563Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the connector to the power steering pump switch.

Fig 15: Connecting Power Steering Pump Switch Connector
G03872564Courtesy of SAAB-SCANIA OF AMERICA, INC.

Install the power steering pump, and tighten the bolts.

Tightening torque: 

22 Nm (2.2 kgf-m, 15.9 ft-lb) 

Fig 16: Installing Power Steering Pump
G03872565Courtesy of SAAB-SCANIA OF AMERICA, INC.

Install the power steering pipe brackets on the intake manifold RH.

Fig 17: Installing Power Steering Pipe Brackets On Intake Manifold RH
G03872566Courtesy of SAAB-SCANIA OF AMERICA, INC.

Install the front side V-belt.

Install the coolant filler tank.

Connect the accelerator cable.

Fig 18: Connecting Accelerator Cable
G03872567Courtesy of SAAB-SCANIA OF AMERICA, INC.

Install the intercooler.

Install the air cleaner element.

Install the air cleaner upper cover and air intake duct as a unit.

Connect the connector to the fuel pump relay.

Fig 19: Connecting Connector To Fuel Pump Relay
G03872568Courtesy of SAAB-SCANIA OF AMERICA, INC.

Connect the battery ground cable to battery.

Lift up the vehicle.

Install the under cover.

Fill the engine coolant.