Brief description FA 57: Notes
Automatic transmission FA 57 is an electronically controlled 5 stage automatic transmission with lock-up function and facility to shift manually.
The FA 57 is principally constructed around 4 planetary gear units, disc clutches, torque converter with lock-up coupling, hydraulic control system and an electronic control system.
The gearbox is controlled by a control module (TCM), which continuously processes information from its own sensors as well as from other control modules. On the basis of this processed information, it controls the transmission hydraulic system.
The FA 57 has the following advantages over conventional hydraulic transmission:
- Improved shifting performance and smoother shifting as torque is reduced when shifting takes place.
- Reduced mechanical stresses on the entire drive train due to torque limitation.
- Improved fuel economy through consumption-optimised driving programs and lock-up on 3rd, 4th and 5th gears (only on 4th and 5th gears with the V6). For further fuel economy slipping is allowed in the lock-up clutch. This means that a difference in speed of 50-200 RPM is allowed between the engine speed and the speed of the input shaft but only during moderate acceleration. This results in the engine pulling longer with lock-up engaged (although slipping) so that the transmission need not engage an open gear (power through the torque converter). Slipping lock-up is the main reason that a higher oil quality is chosen. If the temperature of the gearbox oil rises, the temperature-dependent program will be engaged to protect the transmission against heat damage. See TRANSMISSION FLUID TEMPERATURE SENSOR .
- Possibility to choose between driving programs: Normal, Sport, Winter and Manual.
- Self-diagnosis and storage of diagnostic trouble codes.
- TCM sends and receives information from other control modules in the car via analogue signals and bus communication, see BUS AND DIAGNOSTICS COMMUNICATION