LEMON Manuals: Even more car manuals for everyone

Pressure and flow control

Fig 1: Illustration For Step 1 To 3
G03669271Courtesy of SAAB-SCANIA OF AMERICA, INC.

The purpose of the control valve is to regulate the flow from the pump so that it remains constant, regardless of engine pump RPM.

One side of the control valve is in direct contact with the delivery side of the pump (A). The outlet (B) from the pump incorporates a restriction from which a connecting line (1) leads to the other side of the valve, which is fitted with a spring (2). When not actuated, the valve is pressed against the outlet side.

Inside the control valve is an overflow valve (3) which, when the pressure exceeds a certain limit, is actuated by the pressure of the power steering fluid on the spring-loaded side of the control valve.

For the control valve to operate, a certain amount of power steering fluid must circulate through it continuously at (A) and (C), although not when the steering wheel is at full lock.

The pump delivers a maximum pressure of about 120 bar and a maximum flow of about 7.2 liters per minute.