LEMON Manuals: Even more car manuals for everyone

To remove

Fig 1: Illustration Step For 1 And 2
G03667368Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Remove the oil reservoir. Leave the hoses in place.
  2. Depress the locking tab on the connector and remove it from the holder.

    Unplug the connector.

  3. Raise the car and remove the wheel.

    Clean the area round the wheel sensor using a soft wire brush.

  4. Undo the wheel sensor retaining bolt and remove the wheel sensor.
    Fig 2: Illustration Step For 4
    G03667369Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Remove the grommet and withdraw the lead.
    Fig 3: Illustration Step For 5 And 6
    G03667370Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Detach the lead from the clips and lift out the sensor.