To remove
- Remove the valve housing cover. see VALVE HOUSING COVER .
- Unplug the solenoids' connectors.
- Remove the nine bolts securing the valve housing.
-
NOTE: Start with the two retaining bolts at bottom left which secure the cover for the fluid passages, saving the two top retaining bolts until last. The bolts are of 3 different lengths.IMPORTANT: The passages are filled with transmission fluid.
- Carefully detach the manual valve from the selector lever out of the retaining eye and carefully lift out the valve housing.NOTE: Make sure that the two O-rings fitted inside the valve housing do not fall out.