LEMON Manuals: Even more car manuals for everyone

Transmission fluid temperature sensor: Fitting

Fig 1: Illustration For Steps 1-2, 4
G03516135Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Screw the fluid temperature sensor in place.

    Tightening torque: 25 Nm (18.5 lbf ft) 

  2. Refit the cover and tighten the bolts.

    Tightening torque: 25 Nm (18.5 lbf ft) 

  3. Lower the car to the floor.
  4. Reconnect the fluid temperature sensor's cable.

    Secure the cable in the clip on the transmission.

  5. Refit the battery tray, battery and battery cover.
    Fig 2: Illustration For Step 5
    G03516136Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Fill with transmission fluid, Texaco Texamatic DEXRON III (7045 EU, TL1863 US), to the correct level.
  7. Set the right time on the clock.