Resetting Triggered Limp-Home Solenoid
- Remove the upper engine cover.
- Put the ignition in ON position.
- Contact ECM with the diagnostic tool and clear DTCs.
- Turn the ignition to OFF and wait for 10 seconds. Remove the cover over the throttle body.
- Carefully push the end of the spring towards the throttle body.
- Rotate the black tooth disc counter-clockwise with a screwdriver. A click will be heard in its end position.
- Rotate the pedal arm clockwise.
- Make sure the throttle arm does not follow with the pedal arm when it is rotated.
- Fit the cover over the throttle body and the upper engine cover.