Checking Fuel Pump Capacity, V6.
WARNING:
Checking the capacity of the fuel pump involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection with this work:
- Work only in a well-ventilated area. If approved equipment for the extraction of fuel vapour is available, be sure to use it.
- Wear suitable gloves. Prolonged contact with fuel can cause skin irritation or dramatist.
- Keep a class BE fire extinguisher near at hand. Be mindful of the danger of sparks caused by short circuits and when connecting and disconnecting leads in electrical circuits.
- No smoking anywhere in the vicinity,
- Wear protective goggles.
- Reduce fuel pressure by removing fuel pump fuse no. 19 while the engine is idling. Turn off the ignition once the engine has stopped and replace the fuse.
- Remove the engine cover.
- Detach the return line from the fuel rail.
- Connect the adapter with the hose 83 94 744 Adapter, fuel pressure testing to the return line from the fuel rail. Place the hose opening in a collecting receptacle.
- Run the fuel pump with the diagnostic tool for 30 seconds.
During 30 seconds of operation the pump should deliver at least 700 ml of fuel to the receptacle.