LEMON Manuals: Even more car manuals for everyone

Reading and mirror lighting: Notes

Reading and mirror lights (make-up mirrors) are turned on and off with their individual switches. The power for the various lamps is supplied through DICE, which thus controls the operation. The lighting operates independently of the light switch (53), which controls the functionality of the interior lighting.

Fig 1: Identifying Communication Flow - Reading And Mirror Lighting
G03517819Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fig 2: Reading And Mirror Lighting Circuit Diagram
G03517820Courtesy of SAAB-SCANIA OF AMERICA, INC.

The lighting goes out while the engine is started (starter motor cranks). However, it does not stay off for more than 20 seconds.

So as not to burden the battery more than is necessary, DICE switches the reading and mirror lights off when the starter motor is activated. When the ignition switch reverts from the ST position to ON, DICE switches the lighting on again. For safety reasons the shut-off time is maximized to 20 seconds, so that the lighting will function even if +54 is lacking in the event of a fault.

Voltage +30 for the reading and mirror lighting is always fed to DICE. From pin 70 on the control module the power goes out to the lamps (50F, 50C, 359RH and 359LH). The lights are turned on using their own individual switches.