LEMON Manuals: Even more car manuals for everyone

To fit

  1. Insert the lead and press the connector home.
  2. Fit the wheel sensor in its holder and tighten the retaining bolt.
    Fig 1: Illustration For Step 2-4
    G03505397Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Smear the rubber grommet with a soap solution and fit it in lace.
  4. Press the lead into the retaining clips.
  5. Fit the wheel, see WHEEL . Lower the car.

    Tightening torque 110 N.m (81 lbf ft) 

  6. Plug in the connector.
    Fig 2: Illustration For Step 6, 8
    G03505398Courtesy of SAAB-SCANIA OF AMERICA, INC.
  7. Fit a new cable tie to the air cleaner's attachment point.
  8. Refit the top part of the air cleaner and, if removed earlier, the mass air flow sensor.