Pressure and flow control
- Connecting line
- Spring
- Overflow valve
- From pump delivery side
- To steering gear
- To pump suction side
The control valve regulates a constant flow from the pump irrespective of the engine/pump speed.
One side of the control valve is in direct contact with the delivery side of the pump (A). The outlet (B) from the pump incorporates a restriction from which a connecting line (1) leads to the other side of the valve, which is fitted with a spring (2). When not actuated, the valve is pressed against the outlet side.
Inside the control valve there is an overflow valve (3), which is affected by the hydraulic pressure on the spring side of the control valve at high pressure.
A certain amount of hydraulic fluid must pass through the valves (A) and (C) for the control valve to be able to operate, but not when the steering wheel is at full lock. The pump delivers a maximum pressure of approximately 10 MPa (100 bar) and a maximum flow of approximately 6 liters per minute.