Test Conditions AFTER Opening Cooler Lines
- ATF cooler line was opened between thermostat and ATF cooler. For example: ATF replaced, ATF line change, ATF cooler replaced, ATF thermostat replaced.
- Warm up transmission in lower load range. Switch all transmission ranges several times while doing so.
- Read out ATF pump temperature using Porsche System Tester 2.
- ATF temperature must have reached 194° F (90° C). (coolant circuit open)
- Allow ATF to cool to 104° F (40° C).
- Selector lever is in position "P".
- Test and filling process at idle speed.