LEMON Manuals: Even more car manuals for everyone

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of MAF/IAT Sensor
    GM1837985Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW MAF/IAT sensor seal.
  2. Install the MAF/IAT sensor.
  3. CAUTION: Refer to Fastener Caution .
  4. Install the MAF/IAT sensor screws and tighten to 4 N.m (35 lb in).
  5. Fig 2: View Of MAF/IAT Sensor Wiring Harness Connector
    GM1838957Courtesy of GENERAL MOTORS CORP.
  6. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
  7. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .