LEMON Manuals: Even more car manuals for everyone

Auxiliary Blower Control Module Replacement

WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Auxiliary Blower Control Module
GM1961488Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the body side trim panel - right side. Refer to Body Side Trim Panel Replacement - Right Side .
  2. Disconnect any wiring connectors.
1 Auxiliary Blower Motor Control Module Screw (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Auxiliary Blower Motor Control Module