Removal Procedure
- Remove the inside door handle assembly. Refer to Door Handle Replacement - Inside .
- Remove the front door trim panel. Refer to Trim Panel Replacement - Door .
- Remove the 3 door brackets (1) from the inner panel (3) by levering out the center pin of the bracket.
- Carefully, peel back the door water deflector (2) from the door inner panel (3).
- For the driver's door only, disconnect the door lock cylinder rod (6) from the door lock assembly (7) by releasing the lock cylinder retainer (1).
- For the driver's door only, disconnect the door wiring harness from the door lock micro-switch wiring harness connector (5).
- Remove the 2 handle retaining nuts (4) and remove the outside door handle assembly (2) from the door outside handle bracket assembly (3).
- Remove the door outside handle bracket assembly (3) from the door, if necessary.
IMPORTANT:
The door water deflector only needs to be partly removed to allow access to complete this procedure.