LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Tie the string to the new antenna.
  2. Route the GPS antenna cable as noted during disassembly.
  3. Install the clips (2) in order to secure the cable to the IP.
  4. Install the GPS antenna bracket (1).
    Fig 1: Locating GPS Antenna Assembly Bracket
    GM790033Courtesy of GENERAL MOTORS CORP.
  5. Install the electrical connectors to the IP retainer.
    Fig 2: View Of GPS Electrical Connectors
    GM798721Courtesy of GENERAL MOTORS CORP.
  6. Install the HVAC module. Refer to HVAC Control Module Replacement in HVAC Systems - Automatic.
  7. Install the IP upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek) or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) in Instrument Panel, Gages and Console.
  8. Install the radio. Refer to Radio Replacement in Entertainment.