LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Install the power steering pump pulley to the pump using the J 25033-C  . Ensure that the face of the pulley hub is flush with the pump drive shaft.
  2. Install the power steering pump. Refer to POWER STEERING PUMP REPLACEMENT (3.4L)  or POWER STEERING PUMP REPLACEMENT (2.2L (L61)) .
  3. Install the drive belt to the power steering pump pulley. Refer to DRIVE BELT REPLACEMENT in Engine Mechanical - 3.4L.
  4. Install the upper engine mount. Refer to ENGINE MOUNT REPLACEMENT in Engine Mechanical - 3.4L.
  5. Fill the power steering pump with power steering fluid. Refer to CHECKING AND ADDING POWER STEERING FLUID .
  6. Bleed the power steering system. Refer to BLEEDING THE POWER STEERING SYSTEM .
    Fig 1: Power Steering Pump Pulley
    G01516629Courtesy of GENERAL MOTORS CORP.