Installation Procedure
Important: The ribbon must not be twisted.
- Connect the cruise control cable slug to the ribbon buckle.
- Insert the cruise control cable into the cruise control module until the seal touches the module.
- Position the narrow cable tab into the narrow slot and the wide tab into the wide slot.
Important: The adjuster tab must be pointing toward the front of the car after installation.
- Connect the cruise control cable to the cruise control module by turning the cable clockwise.
- Install the cruise control cable to the retainer clip on the engine.
- Install the cruise control cable to the throttle body bracket pressing into place until fully seated.
- Open the throttle body cam slightly.
- Connect the cruise control cable to the throttle body cam lever.