LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Connect the BCM connectors to the BCM.
  2. Install the BCM (2) to the bracket.
  3. Program the BCM. Refer to BODY CONTROL MODULE (BCM) PROGRAMMING/RPO CONFIGURATION  .
  4. Install the right insulator panels. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT (OUTBOARD) or CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT (INBOARD) in Instrument panel, Gages, and Console
Fig 1: Installing BCM To Bracket
G01510181Courtesy of GENERAL MOTORS CORP.