Diagnostic Aids
An intermittent may be caused by a poor connection, rubbed through wire insulation or a wire broken inside insulation. Check for:
- Poor Connection Or Damaged Harness
Inspect PCM harness for open or short to voltage in status circuit, improper mating, broken locks, improperly formed or damaged terminals, poor terminal to wire connection and damaged harness. - Intermittent Test
Observe SMCC status on Tech 1 while moving related connectors and wiring harness with engine running. If failure is induced, SMCC status display will change to engaged. This may assist in isolating the location of the malfunction. - On 3.1L, SMCC is a stand-alone system, once software has seen a valid cruise engagement, it has learned cruise is on vehicle.