LEMON Manuals: Even more car manuals for everyone

Chart C1B - Crank Signal Check

Crank signal is a 12-volt signal to ECM during cranking to allow enrichment and cancel diagnostics until engine is running or 12 volts is no longer on circuit.

NOTE: The following step numbers refer to the step numbers in the accompanying Flow Chart.
  1. Checks for normal (cranking) voltage to terminal 1 of ECM. Test light should be on during cranking.
  2. Checks to determine if source of blown fuse was faulty ECM.
Fig 1: Chart C1B, Crank Signal
G4736
Fig 2: Chart C1B, Crank Signal
GB0045993