LEMON Manuals: Even more car manuals for everyone

Removal and Installation

WARNING: This page is about a different car, the 2023 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

If replacing chassis control module (with built in steering angle sensor), perform "ADDITIONAL SERVICE WHEN REPLACING CHASSIS CONTROL MODULE (WITH BUILT IN STEERING ANGLE SENSOR)". Refer to Description .

REMOVAL 

  1. Remove spiral cable assembly. Refer to Removal and Installation .
  2. Disconnect harness connector from chassis control module [with built in steering angle sensor (1)].
    GNSDB47280Courtesy of NISSAN
  3. Remove screws (A) and remove chassis control module (with built in steering angle sensor).
    CAUTION:

    Do not drop chassis control module (with built in steering angle sensor).

INSTALLATION 

Installation is in the reverse order of removal.

CAUTION:

If replacing chassis control module (with built in steering angle sensor), perform "ADDITIONAL SERVICE WHEN REPLACING CHASSIS CONTROL MODULE (WITH BUILT IN STEERING ANGLE SENSOR)". Refer to Description .