System Description
WARNING: This page is about a different car, the 2023 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
SYSTEM DIAGRAM
OUTLINE
The daytime running light is controlled by the daytime running light control function and combination switch reading function of the BCM, and the Smart FET control function of the IPDM E/R.
Signal transmission function list
| Signal name | Input | Output | Description |
|---|---|---|---|
| Combination switch signal | Combination switch | BCM | Transmits the combination switch signal to the BCM. |
| Parking brake switch signal | Parking brake switch | Combination meter | Transmits the parking brake switch signal to the combination meter. |
| Parking brake switch signal | Combination meter | BCM (CAN) | Transmits the parking brake switch signal via CAN communication. |
| Daytime running light request signal | BCM | IPDM E/R (CAN) | Transmits the daytime running light request signal via CAN communication. |
DAYTIME RUNNING LIGHT OPERATION
- The BCM detects the combination switch (lighting and turn signal switch) condition by the combination switch reading function.
- The BCM detects the vehicle condition depending on the engine status signal (received from ECM via CAN communication).
- The BCM transmits the daytime running light request signal to the IPDM E/R via CAN communication according to the daytime running light ON condition.
Daytime running light ON condition:
- Engine running and any following conditions are satisfied:
- Lighting switch OFF
- Lighting switch AUTO (Only when the illumination judgement by auto light system is OFF). Refer to System Description .
- Engine running and any following conditions are satisfied:
- The IPDM E/R turns the integrated Smart FET ON, and turns the daytime running light ON according to the daytime running light request signal.