LEMON Manuals: Even more car manuals for everyone

Work Procedure

  1. FRONT CAMERA UNIT CONFIGURATION 

    Perform the front camera unit configuration with CONSULT. Refer to Description .

    GO TO 2.

  2. CAMERA AIMING ADJUSTMENT 
    1. Turn ignition switch OFF.
    2. Turn ignition switch ON.
      NOTE: If ignition switch is not turned OFF after setting front camera unit aiming adjustment, ADAS control unit may detect DTC.
    3. Perform the camera aiming adjustment with CONSULT. Refer to Description .

    GO TO 3.

  3. PERFORM SELF-DIAGNOSIS 
    1. Turn ignition switch OFF.
    2. Turn ignition switch ON.
      NOTE: If ignition switch is not turned OFF after setting front camera unit aiming adjustment, ADAS control unit may detect DTC.
    3. Perform the self-diagnosis of front camera unit with CONSULT. Check if any DTC is detected.

    Is any DTC detected?

    YES

    Perform the trouble diagnosis for the detected DTC. Refer to DTC Index .

    NO

    GO TO 4.

  4. LDW SYSTEM ACTION TEST 
    1. Perform the LDW system action test. Refer to Description .
    2. Check that the LDW system operates normally.

    GO TO 5.

  5. BLIND SPOT WARNING ACTION TEST 
    1. Perform the Blind Spot Warning system action test. Refer to Description .
    2. Check that the Blind Spot Warning system operates normally.

    WORK END