LEMON Manuals: Even more car manuals for everyone

Component Inspection

  1. CHECK EOP SENSOR

    1. Turn ignition switch OFF.
    2. Disconnect EOP sensor harness connector.
    3. Check resistance between EOP sensor connector terminals.
      EOP sensor Condition Resistance
      (kΩ)
      + -
      Terminal
      1 2 None 4 - 10
      3 2 - 8
      2 1 4 - 10
      3 1 - 3
      3 1 2 - 8
      2 1 - 3

    Is the inspection result normal?

    YES 

    INSPECTION END.

    NO 

    Replace EOP sensor. Refer to COMPONENT LOCATION .