System Description: Description
Log-in function is the function that registers the setting status of various systems and retrieves the status for each Intelligent Key as desired.
Registered information is automatically adjusted to the driving position (seat, steering column, and door mirror position) registered by unlocking the driver side door with the Intelligent Key or by operating the user selection function on the display.
When user selection is performed by display operation, the user information registered with another Intelligent Key can also be retrieved.
For the registration of the log-in function, the status is automatically registered as one of the following vehicle statuses when the ignition switch is turned to OFF. For details on registration, refer to DESCRIPTION .
| Item | Request status |
|---|---|
| Ignition position | ON |
| Driver side door | Closed |
| Navigation system | Activated |
| CONSULT | Not connected |
OPERATION PROCEDURE
- Turn ignition switch ON.
- Push desired user change switch on display.
- Driver seat, steering column and door mirror will move to the memorized position.
OPERATION CONDITION
All of the following conditions must be satisfied in order to retrieve the registration information of the log-in function.
If one of the following conditions is not satisfied, the interlocked operation of the driving position for log-in function is interrupted.
| Item | Request status |
|---|---|
| Ignition position | ON |
| Navigation system | Activated |
| Initialization | Done |
Switch inputs
|
OFF (Not operated) |
| CVT shift selector | P position |
| Log-in function memory | Registered |
| Vehicle speed | 0 km/h (0 MPH) |
| CONSULT | Not connected |
DETAIL FLOW
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 |
|
- | When the following function is performed, the driver seat control unit transmits the unlock signal from BCM via CAN communication and receives the Key ID signal.
|
| 2 | - | - | Driver seat control unit performs the seat slide and steering tilt directly to the exit assist function. Other loads move to the exit assist function after performing log-in function. |
| 3 | - | - | Driver seat control unit performs the entry assist function. |