LEMON Manuals: Even more car manuals for everyone

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B26F3 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC DESCRIPTION .
  • If DTC B26F3 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC DESCRIPTION .
DTC No. CONSULT Screen Terms (Trouble Diagnosis Content) DTC Detection Condition
B26F3 START CONT RLY ON Diagnosis condition When the ignition switch is ON.
Signal (terminal) -
Threshold BCM requests IPDM E/R to turn starter control relay OFF, but BCM cannot receive starter control relay OFF state signal from IPDM E/R (CAN)
Diagnosis delay time -