LEMON Manuals: Even more car manuals for everyone

Disassembly and Assembly: Disassembly

  1. Install Tool (A) to the front coil spring and strut.

    Tool number: ST35652000 (-) 

    CAUTION: When installing Tool (A), wrap a shop cloth around the front coil spring and strut to protect the parts from damage.
  2. Secure Tool (A) in a vise.
    Fig 1: Installing Tool To Front Coil Spring And Strut
    G08688986Courtesy of NISSAN NORTH AMERICA, INC.
  3. Slightly loosen the piston rod lock nut.
    WARNING: Do not remove piston rod lock nut completely. If the piston rod lock nut is removed completely, the front spring can jump out and may cause serious damage or injury.
  4. Compress the front spring using a spring compressor (commercial service tool).
    WARNING: Make sure that the pawls of the two spring compressors are firmly hooked on the front spring. The spring compressors must be tightened alternately so as not to tilt the front spring.
    Fig 2: Compressing Coil Spring Using Commercially Available Spring Compressor
    G04921522Courtesy of NISSAN NORTH AMERICA, INC.
  5. Make sure the front spring is free between the strut mount bearing and the front spring lower rubber seat. Remove the piston rod lock nut.
  6. Remove the strut mount insulator, the bound bumper, and the strut mount bearing.
  7. Remove the bound bumper from the strut mount insulator.
  8. Gradually release the spring compressor (commercial service tool) and remove the front spring.
  9. Remove the front spring lower rubber seat.