LEMON Manuals: Even more car manuals for everyone

Diagnosis Procedure

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

  1. CHECK GROUND CONNECTION 
    1. Turn ignition switch OFF.
    2. Check ground connection E9. Refer to Ground Inspection in "CIRCUIT INSPECTION ".

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Repair or replace ground connection.

  2. CHECK ECT SENSOR POWER SUPPLY CIRCUIT 
    1. Disconnect engine coolant temperature (ECT) sensor harness connector.
    2. Turn ignition switch ON.
    3. Check the voltage between ECT sensor harness connector and ground.
      ECT sensor Ground Voltage
      Connector Terminal
      F11 1 Ground Approx. 5 V
      Fig 1: Checking Voltage Between ECT Sensor Terminal 1 And Ground
      G04874990Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: GO TO 3.

      NO: Repair open circuit, short to ground or short to power in harness or connectors.

  3. CHECK ECT SENSOR GROUND CIRCUIT FOR OPEN AND SHORT 
    1. Turn ignition switch OFF.
    2. Disconnect ECM harness connector.
    3. Check the continuity between ECT sensor harness connector and ECM harness connector.
      ECT sensor ECM Continuity
      Connector Terminal Connector Terminal
      F11 2 F13 52 Existed
    4. Also check harness for short to ground and short to power.

      Is the inspection result normal? 

      YES: GO TO 4.

      NO: Repair open circuit, short to ground or short to power in harness or connectors.

  4. CHECK ENGINE COOLANT TEMPERATURE SENSOR 

    Refer to "COMPONENT INSPECTION ".

    Is the inspection result normal? 

    YES: GO TO 5.

    NO: Replace engine coolant temperature sensor. Refer to "REMOVAL AND INSTALLATION ".

  5. CHECK INTERMITTENT INCIDENT 

    Refer to "INTERMITTENT INCIDENT ".

    : INSPECTION END