Diagnosis Procedure
Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".
- CHECK FRONT DOOR SWITCH INPUT SIGNAL
- Turn ignition switch OFF.
- Check signal between BCM connector and ground with oscilloscope.
Terminals Front door condition Voltage (V) (Approx.) (+) (-) BCM connector Terminal M18 58 Ground Driver side OPEN 0 CLOSE 32 Passenger side OPEN 0 CLOSE Is the inspection result normal?
YES: GO TO 4
NO: GO TO 2
- CHECK FRONT DOOR SWITCH CIRCUIT
- Disconnect BCM connector.
- Check continuity between BCM connector and front door switch connector.
BCM connector Terminal Front door switch connector Terminal Continuity M18 58 B8 (Driver side) 2 Yes 32 B108 (Passenger side) - Check continuity between BCM connector and ground.
BCM connector Terminal Ground Continuity M18 58 No 32 Is the inspection result normal?
YES: GO TO 3
NO: Repair or replace harness between BCM and front door switch.
- CHECK FRONT DOOR SWITCH
Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: GO TO 4
NO: Replace malfunctioning front door switch.
- CHECK INTERMITTENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".
: Inspection End.