LEMON Manuals: Even more car manuals for everyone

Oil Pump: Assembly

  1. Install O-ring to oil pump cover.
    CAUTION: Do not reuse O-ring.
    Fig 1: Installing O-Ring From Oil Pump Cover
    G04876096Courtesy of NISSAN NORTH AMERICA, INC.
  2. Install O-ring to oil pump housing.
    CAUTION: Do not reuse O-ring.
    Fig 2: Installing Oil Pump Housing O-Ring
    G07013742Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install oil pump housing oil seal to the oil pump housing until it is flush, using the drift.
    CAUTION:
    • Never reuse oil seal.
    • Apply ATF to oil seal.
    Fig 3: Installing Oil Pump Housing Oil Seal Using Drift
    G04876099Courtesy of NISSAN NORTH AMERICA, INC.
  4. Install oil pump housing to oil pump cover.
  5. Tighten bolts (<==) to the specified torque in numerical order shown in the figure after temporarily tightening them.
    Fig 4: Locating Oil Pump Cover Bolts Tightening Sequence
    G05218916Courtesy of NISSAN NORTH AMERICA, INC.