LEMON Manuals: Even more car manuals for everyone

On Board Diagnosis Logic

NOTE: If DTC P0340 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to DTC P0643 SENSOR POWER SUPPLY .
DTC DETECTING CONDITION CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0340 0340 Camshaft position sensor (PHASE) circuit
  • The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
  • The cylinder No. signal is not set to ECM during engine running.
  • The cylinder No. signal is not in the normal pattern during engine running.
  • Harness or connectors

    [Camshaft position sensor (PHASE) circuit is open or shorted.]

  • Camshaft position sensor (PHASE)
  • Camshaft (INT)
  • Starter motor (Refer to STARTING SYSTEM .)
  • Starting system circuit (Refer to STARTING SYSTEM .)
  • Dead (Weak) battery