LEMON Manuals: Even more car manuals for everyone

With Consult-II

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine.
  2. Accelerate vehicle to maintain the following conditions.

    ACCELE POS: 1.5/8 - 2.0/8 

    Selector lever: "D" position 

    Gear position: 3rd ==> 4th Gear (FR/B ON/OFF) 

    Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving conditions required for this test. 

  3. Perform step "2" again.
  4. Turn ignition switch "OFF", then perform step "1" to "3" again.
  5. Check "SELF-DIAG RESULTS" mode for "A/T" with CONSULT-II.

    If DTC (P1841) is detected, go to "DIAGNOSTIC PROCEDURE ".

    If DTC (P1757) is detected, go to "DIAGNOSTIC PROCEDURE ".

    Fig 1: Identifying CONSULT II Display - SELECT DIAG MODE
    G04899604