Turn Signal Operation: Notes
WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
With the hazard switch in the OFF position and the ignition switch in the ON or START position, power is supplied
- through 10A fuse [No. 26, located in the fuse block (J/B)]
- to hazard switch terminal 2
- through terminal 1 of the hazard switch
- to combination flasher unit terminal B
- through terminal L of the combination flasher unit
- to turn signal switch terminal 1.
Ground is supplied
- to combination flasher unit terminal E
- through body grounds M28 and M54.