LEMON Manuals: Even more car manuals for everyone

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the front wheels in the straight-ahead position.
  2. Remove the driver air bag module. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect steering wheel switches.
  4. Remove the steering wheel center nut.
  5. Remove the steering wheel using Tools.

    Tool number A: J-1859A 

    B: J-42578 

    Fig 1: Removing Steering Wheel Using Tools
    G03599697Courtesy of NISSAN MOTOR CO., U.S.A.
    CAUTION: Place a piece of tape across the spiral cable so it will not be rotated out of position.
  6. Inspect the steering wheel near the puller holes for damage. If damaged, replace the steering wheel.
    • Remove steering wheel rear cover and steering wheel switches, if required.