LEMON Manuals: Even more car manuals for everyone

With GST

WARNING: This page is about a different car, the 2004 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operating temperature.
  2. Set voltmeter probes between ECM terminal 91 [HO2S1 (B1) signal] or 92 [HO2S1 (B2) signal] and ground.
  3. Check the following with engine speed held at 2, 000 RPM constant under no-load.
    • The voltage should go above 0.70V at least once.
    • The voltage should go below 0.21 V at least once.
  4. If NG, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Checking Voltage Between Terminal 91 Or 92 And Ground
    G02885810Courtesy of NISSAN MOTOR CO., U.S.A.