LEMON Manuals: Even more car manuals for everyone

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON" and wait at least 2 seconds.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Display CONSULT II (Data Monitor)
    G02884606Courtesy of NISSAN MOTOR CO., U.S.A.