LEMON Manuals: Even more car manuals for everyone

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait maximum of 2 consecutive minutes.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Display CONSULT II (Data Monitor)
    G02884546Courtesy of NISSAN MOTOR CO., U.S.A.