System Description: Outline
The auto light control system uses an optical sensor that detects the brightness of outside light.
When the lighting switch is in AUTO position, it automatically turns on/off the parking lamps and the headlamps (and fog lamps, if equipped) in accordance with the ambient light. Sensitivity can be adjusted in four steps. For the details of the setting, Refer to SETTING CHANGE FUNCTIONS .
When the lighting switch is in "AUTO" position, power is supplied
- From BCM (body control module) terminal 45
- To auto light sensor terminal 1.
When lighting switch is in "AUTO" position, ground is supplied
- From BCM (body control module) terminal 53
- To auto light sensor terminal 3.
When ignition switch is turn to "ON" or "START" position, and
When outside brightness is darker than prescribed level, input is supplied
- To BCM (body control module) terminal 38
- From auto light sensor terminal 2.
The headlamps will then illuminate. For a description of headlamp operation, Refer to HEADLAMP (FOR USA) or HEADLAMP (FOR CANADA) .