LEMON Manuals: Even more car manuals for everyone

With CONSULT-II

  1. Attach the EVAP service port adapter securely to the EVAP service port.
  2. Also attach the pressure pump and hose to the EVAP service port adapter.
  3. Turn ignition switch ON.
  4. Select the "EVAP SYSTEM CLOSE" of "WORK SUPPORT MODE" with CONSULT-II.
  5. Fig 1: Displaying EVAP SYSTEM CLOSE Screen
    G00776122Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "START". A bar graph (Pressure indicating display) will appear on the screen.
  7. Apply positive pressure to the EVAP system until the pressure indicator reaches the middle of the bar graph.
  8. Fig 2: Displaying EVAP SYSTEM CLOSE Screen Showing Pressure Indicator
    G00776123Courtesy of NISSAN MOTOR CO., U.S.A.
  9. Remove EVAP service port adapter and hose with pressure pump.
  10. Locate the leak using a leak detector. Refer to EVAPORATIVE EMISSION LINE DRAWING  .
    Fig 3: Identifying Special Tool
    G00776124Courtesy of NISSAN MOTOR CO., U.S.A.