LEMON Manuals: Even more car manuals for everyone

With Consult-II

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 1 second.
  4. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
  5. Repeat steps 3 and 4 four times.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Display CONSULT II (Data Monitor)
    G02884586Courtesy of NISSAN MOTOR CO., U.S.A.