LEMON Manuals: Even more car manuals for everyone

Camshaft Position Sensor (Phase)

  1. Loosen the fixing bolt of the sensor.
  2. Disconnect camshaft position sensor (PHASE) harness connector.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
    Fig 1: Identifying Camshaft Position Sensor (PHASE)
    G02884425Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check resistance as shown in the figure.
    Fig 2: Camshaft Position Sensor Terminals (PHASE) Resistance Chart
    G02884426Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 3: Checking Resistance Between Camshaft Position Sensor Terminals (PHASE)
    G02884427Courtesy of NISSAN MOTOR CO., U.S.A.