Essential Tool: Drive Plate Installer (NTB02-095)
WARNING: This page is about the Sentra GXE, Automatic, which is a different variant/trim than selected.
Publication date: 2002-09-10Reference number: NTB02-095
ESSENTIAL TOOL: DRIVE PLATE INSTALLER
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB02-095, Date of Issue:
September 10, 2002
| NISSAN: | 2002-2003 Altima; 2000-2003 Sentra; 1991-1994 Sentra; 1991-1993 NX 1600 and 2000 |
| CLASSIFICATION: | TE02-022 |
| SECTION: | Tool and Equipment |
| APPLIED VEHICLE(S): | 2002-2003 Altima (L31); 2000-2003 Sentra (B15); 1991-1994 Sentra (B13); 1991-1993 NX 1600 and 2000 (KB13) |
SERVICE INFORMATION
The J-38873-A Drive Plate Installer is a special service tool required for A/C Clutch installation on the Applied Vehicles.
NOTE:
For any vehicle, including the above: it is not necessary to replace the compressor assembly for an A/C clutch incident.
- For specific vehicle information about A/C Clutch remove and replace procedures, refer to the appropriate Service Manual A/C section.
- For the 2002 and later Altima: refer to NTB02-057 for the A/C Compressor Clutch replacement procedure.
- Refer to the Essential Tool Shipment Flyer (Fig 2 and 3 ) for additional information.
- This special tool is "Essential" and has been automatically sent to all Nissan dealers.
- Your dealership non-vehicle account will be charged.
- Additional installers can be ordered from Tech-Mate.