LEMON Manuals: Even more car manuals for everyone

Component Inspection

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "OFF". (Stay for at least 5 seconds.)
  2. Disconnect neutral position switch harness connector.
  3. Remove neutral position switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
  4. Push and release neutral position switch and check continuity between neutral position switch terminals 1 and 2.
    PARK NEUTRAL POSITION SWITCH CONTINUITY

    Terminal Condition Continuity
    1 - 2 Push neutral position switch Yes
    Release neutral position switch No
  5. If NG, replace the neutral position switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
Fig 1: Identifying Continuity Between Neutral Position Switch Terminals 1 And 2
G04204248Courtesy of NISSAN MOTOR CO., U.S.A.