LEMON Manuals: Even more car manuals for everyone

Removal and Installation: Removal

  1. Remove steering angle sensor. Refer to REMOVAL AND INSTALLATION .
  2. Disconnect harness connector from combination switch.
  3. Remove the combination switch (1) mounting screw (A).
    G16071865Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Pull out the combination switch (1) by moving it alternately on the right and left side.
    CAUTION: Never deformation and damage the pawls.
    G16071866Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    : Pawl