LEMON Manuals: Even more car manuals for everyone

>>A<< Engine Oil Pressure Switch Installation

  1. Apply sealant to the engine oil pressure switch thread.

    Specified sealant: ThreeBond 1215 or equivalent 

    NOTE: Install the engine oil pressure switch immediately after applying sealant.
    CAUTION: After the installation, until a sufficient period of time (one hour or more) elapses, do not apply the engine oil or water to the sealant application area or start the engine.
    G12680338Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. In the same manner as removal, use special tool oil pressure switch wrench (MB992118) to tighten the engine oil pressure switch to the specified torque.

Tightening torque: 10 ± 2 N.m (89 ± 17 in-lb) 

G10227845Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.