LEMON Manuals: Even more car manuals for everyone

Rectangular Waterproof Connector

  1. Disengage the front holder with a screwdriver and remove it.
    G08286917Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Insert the tip of a screwdriver 0.8 mm (0.03 inch) width into the connector as shown in the figure, push it lightly to raise the housing lance, and pull out the terminal.
    G09618882Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Press the contact point to the male terminal down by holding a screwdriver 1.4 mm (0.06 inch) width as shown in the figure. Lightly squeeze the outer edge so the flats are parallel with the bottom.
G08286919Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.